#include "ThreeDimensionDiagraph.h"
#include "ui_ThreeDimensionDiagraph.h"

#include <QFileDialog>

#include <vtkLightKit.h>
#include <vtkAxesActor.h>
#include <vtkRenderer.h>
#include <vtksys/SystemTools.hxx>
#include <vtkOrientationMarkerWidget.h>
#include <vtkPlaneWidget.h>
#include <vtkPlane.h>
#include <vtkDataSet.h>
#include <vtkUnstructuredGrid.h>
#include <vtkStructuredGrid.h>
#include <vtkPolyData.h>
#include <vtkMapper.h>
#include <vtkPolyDataMapper.h>
#include <vtkPointSet.h>
#include <vtkPropAssembly.h>
#include <vtkCubeAxesActor.h>
#include <vtkGenericOpenGLRenderWindow.h>
#include <WidgetCutter.h>
#include <UnstructuredGridReader.h>
#include <vtkTextProperty.h>
#include <vtkCutter.h>
#include <vtkUnstructuredGrid.h>
#include <vtkCamera.h>
#include <vtkCellData.h>
#include <MutiVTKFilesReader.h>
#include <vtkLookupTable.h>
#include <vtkPointData.h>
#include <vtkDataSetMapper.h>
#include <vtkScalarBarActor.h>
#include <vtkScalarBarWidget.h>
#include <vtkProperty.h>
#include <vtkScalarBarRepresentation.h>
#include <vtkDelimitedTextReader.h>
#include <vtkRenderWindowInteractor.h>
#include <CommonFunction.h>
#include "DelimitedTextReader.h"
#include <vtkInteractorStyleTrackballCamera.h>
#include <vtkSphereSource.h>
#include "FarFieldDataGenerator.h"
#include "NearFieldDataGenerator.h"
#include "PostTools.h"
namespace pst
{

    ThreeDimensionDiagraph::ThreeDimensionDiagraph(QWidget* parent)
        : PostWindowBase(parent/*, caseID*//*, BaseModule::GraphWindowType::Post3dDrawing*/)
        , ui(new Ui::ThreeDimensionDiagraph())
        , m_dataType(-1)
        , m_renderWindow3D(vtkSmartPointer<vtkGenericOpenGLRenderWindow> ::New())
        //, m_fieldGraphGenerator(std::shared_ptr<pst::FieldGraphGenerator>(new pst::FieldGraphGenerator()))
        , m_mutiReader(std::shared_ptr<pst::MutiVTKFilesReader>(new pst::MutiVTKFilesReader()))
        , m_widgetCutter(std::shared_ptr<pst::WidgetCutter>(new pst::WidgetCutter()))
        , m_render3D(vtkSmartPointer<vtkRenderer>::New())
        , m_leftDownCornerAxes(vtkSmartPointer<vtkAxesActor>::New())
        , m_leftDownCornerWidget(vtkSmartPointer<vtkOrientationMarkerWidget>::New())
        //, m_viewResultDataID(viewResultDataID)
        , m_interactor(vtkSmartPointer<vtkRenderWindowInteractor>::New())
        //, m_caseID(caseID)
        //, m_iD(typeInnerID)
        , m_dataSet{ nullptr /*vtkSmartPointer< vtkDataSet>::New() */ }
        , m_dataMapper{ vtkSmartPointer<vtkDataSetMapper>::New() }
        , m_dataActor{ vtkSmartPointer<vtkActor>::New() }
        , m_lookupTable{ vtkSmartPointer<vtkLookupTable>::New() }
        , m_scalarBarActor{ vtkSmartPointer<vtkScalarBarActor>::New() }
        , m_scalarBarWidget{ vtkSmartPointer<vtkScalarBarWidget>::New() }
        , m_delimitedTextReader{ vtkSmartPointer<vtkDelimitedTextReader>::New() }
        , m_farFieldDataGenerator{ new FarFieldDataGenerator() }
        , m_nearFieldDataGenerator{ new NearFieldDataGenerator() }
        //, m_fileName{ fileName }
        , m_filePathToRead{  }
        , m_isReadDataSuc{ false }
        , m_scalarBarTitle{ }
        , m_isCutterAdded{ false }
        , m_cutterInputData{ nullptr }
        , m_emptyData(vtkSmartPointer<vtkPolyData>::New())
        , m_shouldLogTheData(false)
        , m_shouldNormalizeTheData(false)
        , m_logDefautFactory{ 1. }
        , m_logDataRRange{ 0,1 }
        , m_originalRRange{ 0,1 }

    {
        ui->setupUi(this);

        this->ui->qvtkWidget->setRenderWindow(m_renderWindow3D);
        m_renderWindow3D->AddRenderer(m_render3D);
        m_render3D->GetActiveCamera()->SetParallelProjection(true);
        m_render3D->AutomaticLightCreationOff();
        m_render3D->SetUseDepthPeeling(1);
        vtkNew<vtkLightKit> lightKit;
        lightKit->AddLightsToRenderer(m_render3D);
        lightKit->SetKeyLightWarmth(0.5);
        lightKit->SetFillLightWarmth(0.5);
        lightKit->SetBackLightWarmth(0.5);
        lightKit->SetHeadLightWarmth(0.5);
        //m_dataMapper->SetInputData(m_emptyData);
        m_dataActor->SetMapper(m_dataMapper);

        initUI();
        InitDefaultLookupTable();
        initScalarBarPipeLine();
        //checkDataType(fileName);
        //importPreProcessWindowData();

        /*     if (!isNew)
             {
                 auto m_curCaseModel = ProjectManager::CaseModelManager::getinstance()->getCurrentCase();
                 if (m_curCaseModel == nullptr)
                 {
                     BaseModule::MessageBoxButton bt;
                     emit IBaseSignalInstance->signal_showMessageDialog(QObject::tr("ERROR"),
                         QObject::tr("Get case model failed!"), BaseModule::MessageBoxType::Error, bt);
                 }
                 m_gain3DData = m_curCaseModel->getMOMDataManager()->getMOMSimulationData()->getThreeDimensionDataByID(m_iD).get();
                 if (m_gain3DData == nullptr)
                 {
                     BaseModule::MessageBoxButton bt;
                     emit IBaseSignalInstance->signal_showMessageDialog(QObject::tr("ERROR"),
                         QObject::tr("Get data manager Failed!"), BaseModule::MessageBoxType::Error, bt);
                 }
                 else
                 {
                     readDataFromDataManager();
                     restoreLogic();
                 }


             }
             auto iBaseSignal = IBaseSignalInstance;
             connect(iBaseSignal, &BaseModule::IBaseSignal::signal_refreshResultWindowTitle, this, &ThreeDimensionDiagraph::slot_refreshWindowTitle);*/
        vtkNew<vtkAxesActor> axes;
        axes->SetOrigin(0, 0, 0);
        axes->SetTotalLength(0.2, 0.2, 0.2);
        m_render3D->AddActor(axes);

        vtkNew<vtkSphereSource> sphereSource;
        sphereSource->SetRadius(0.15);
        sphereSource->Update();

        vtkNew<vtkPolyDataMapper> sphereMapper;
        sphereMapper->SetInputConnection(sphereSource->GetOutputPort());

        vtkNew<vtkActor> sphereActor;
        sphereActor->SetMapper(sphereMapper);
        m_render3D->AddActor(sphereActor);

        m_renderWindow3D->Render();
    }

    ThreeDimensionDiagraph::~ThreeDimensionDiagraph()
    {
        if (m_isReadDataSuc)
        {
            //writeMOMData();
        }
        delete ui;
        delete m_farFieldDataGenerator; m_farFieldDataGenerator = nullptr;
        delete m_nearFieldDataGenerator; m_nearFieldDataGenerator = nullptr;
        //emit this->windowClosed(m_caseID, m_viewResultDataID);
    }

    bool ThreeDimensionDiagraph::ReadFieldData(QString filePath)
    {
        m_mutiReader->SetFileName(filePath);
        if (!m_mutiReader->Update())
        {
            return false;
        }
        auto data = m_mutiReader->GetOutput();

        auto cellArraysNum = data->GetCellData()->GetNumberOfArrays();
        if (cellArraysNum > 0)
        {
            data->GetCellData()->SetActiveAttribute(0, vtkDataSetAttributes::AttributeTypes::SCALARS);
            m_scalarBarAutoDataRange[0] = data->GetCellData()->GetArray(0)->GetRange()[0];
            m_scalarBarAutoDataRange[1] = data->GetCellData()->GetArray(0)->GetRange()[1];
        }

        return true;
    }

    QString ThreeDimensionDiagraph::generateFilePath(const QString& fileName, int index)
    {
        //auto caseModel = ProjectManager::CaseModelManager::getinstance()->getModelByID(m_caseID);
        //if (!caseModel)
        //{
        //    return  QString();
        //}
        //std::vector<std::string> tempRes;

        //pst::CommonFunction::Stringsplit(fileName.toStdString(), ".", tempRes);
        //if (tempRes.size() != 2)
        //{
        //    std::cout << "Stringsplit first 1 column error!" << std::endl;
        //    return false;
        //}
        //m_scalarBarTitle = QString::fromStdString(tempRes[0]);
        //auto newFileName = QString::fromStdString(tempRes[0] + "_" + std::to_string(index) + "." + tempRes[1]);
        //auto filePath = (caseModel->getCaseDir() + "/" + newFileName);
        //return filePath;
        return QString();
    }

    QList<QString> ThreeDimensionDiagraph::getFreqFromSetting()
    {
        QList<QString> freqList;
        //auto simulationData = ProjectManager::CaseModelManager::getinstance()->getCurrentCase()->getMOMDataManager()->getMOMSimulationData();
        //auto m_solverSet = QSharedPointer<DataModel::SimulationMOMSolveSettingsData>(new DataModel::SimulationMOMSolveSettingsData(*simulationData->getSolveSettingsData()));
        //m_solverSet->getFreqUnit();
        //m_solverSet->getSweepFrequencyUnit();
        //bool _isSweep = m_solverSet->getBSweepFreq();
        //if (!_isSweep)//单频
        //{
        //    freqList.append(QString::number(m_solverSet->getFreqValue()));
        //}
        //else//扫频
        //{
        //    auto startFreq = m_solverSet->getStartFrequencyValue();
        //    auto endFreq = m_solverSet->getEndFrequencyValue();
        //    auto step = m_solverSet->getStepFrequencyValue();
        //    int num = (int)std::abs((endFreq - startFreq) / step) + 1;
        //    for (int i = 0; i < num; i++)
        //    {
        //        freqList.append(QString::number(startFreq + i * step));
        //    }
        //}
        return  freqList;
    }

    void ThreeDimensionDiagraph::initUI()
    {
        //slot_refreshWindowTitle(m_caseID, (int)BaseModule::ResultType::ResultThreeDimensionGraph, m_viewResultDataID);
        ui->splitter->setStretchFactor(0, 8);
        ui->splitter->setStretchFactor(1, 1);
        //设置频率下拉列表
        auto freqList = getFreqFromSetting();
        for (auto i : freqList)
        {
            ui->comboBoxFrequency->addItem(i);
        }

        for (int i = 1; i < 50; ++i)
        {
            ui->comboBoxSBFontSize->addItem(QString::number(i));
        }
        ui->comboBoxSBFontSize->setCurrentIndex(23);

        ui->comboBoxSBTitleColor->setShowColorName(false);
        ui->comboBoxSBTitleColor->appendPredefinedColors();

        //切片方向
        ui->comboBox_sliceDirection->addItem("X");
        ui->comboBox_sliceDirection->addItem("Y");
        ui->comboBox_sliceDirection->addItem("Z");

        //切片位置
        generateSlicePosition(0);

        activeButtonAfterReadData();

    }

    void ThreeDimensionDiagraph::checkDataType(const QString& fileName)
    {
        //根据文件名判断类型
        //远场
        if (fileName == "RCSFile.txt" || fileName == "GainDirectionFile.txt" || fileName == "monostatic_RCSFile.txt")
        {
            m_dataType = 0;
        }
        //近场
        else if (fileName == "MagneticField.txt" || fileName == "ElectricField.txt")
        {
            m_dataType = 1;
        }
        //表面电流
        else if (fileName == "SurfaceCurrentDensity.vtk")
        {
            m_dataType = 2;
        }
    }

    void ThreeDimensionDiagraph::decideLogFactory()
    {
    }

    void ThreeDimensionDiagraph::setLogNormalButtonState(bool state)
    {
        if (m_dataType == 0 || m_dataType == 1)//远场或者近场
        {
            ui->checkBox_normalization->setEnabled(state);
            ui->checkBox_logarithm->setEnabled(state);
        }
    }

    void ThreeDimensionDiagraph::setSlicePositionButtonState()
    {
        if (m_dataType == 1)
        {
            ui->comboBox_slicePosition->setEnabled(true);
        }
        else
        {
            ui->comboBox_slicePosition->setEnabled(false);
        }
    }

    bool ThreeDimensionDiagraph::readData(const QString& filePath)
    {
        //远场
        //远场
        //远场
        if (m_dataType == 0)
        {
            m_isReadDataSuc = readerDelimitedTextFromLocal(filePath);
            //if (!m_isReadDataSuc)
            //{
            //    BaseModule::MessageBoxButton bt;
            //    emit IBaseSignalInstance->signal_showMessageDialog(QObject::tr("ERROR"),
            //        QObject::tr("Data Illegal!"), BaseModule::MessageBoxType::Error, bt);
            //    return false;
            //}
            //m_farFieldDataGenerator->setInputData(m_delimitedTextReader->GetOutput());
            //auto suc = m_farFieldDataGenerator->update();
            //if (!suc)
            //{
            //    BaseModule::MessageBoxButton bt;
            //    emit IBaseSignalInstance->signal_showMessageDialog(QObject::tr("ERROR"),
            //        QObject::tr("Data Illegal!"), BaseModule::MessageBoxType::Error, bt);
            //    m_isReadDataSuc = false;
            //    return false;
            //}
            m_dataSet = m_farFieldDataGenerator->getOutputData(); //structuredGrid

            m_scalarBarAutoDataRange[0] = m_dataSet->GetPointData()->GetArray(0)->GetRange()[0];
            m_scalarBarAutoDataRange[1] = m_dataSet->GetPointData()->GetArray(0)->GetRange()[1];

        }


        //近场
        //近场
        //近场
        else if (m_dataType == 1)
        {
            m_isReadDataSuc = readerDelimitedTextFromLocal(filePath);
            if (!m_isReadDataSuc)
            {
                //BaseModule::MessageBoxButton bt;
                //emit IBaseSignalInstance->signal_showMessageDialog(QObject::tr("ERROR"),
                //    QObject::tr("Data Illegal!"), BaseModule::MessageBoxType::Error, bt);
                //return false;
            }

            m_nearFieldDataGenerator->setInputData(m_delimitedTextReader->GetOutput());

            //auto _currentCaseModel = ProjectManager::CaseModelManager::getinstance()->getCurrentCase();
            //auto _nearFieldCoordinate = _currentCaseModel->getMOMDataManager()->getMOMSimulationData()->getNearFieldCoordinateData();
            //int numX = 0;
            //int numY = 0;
            //int numZ = 0;
            //if (!qFuzzyCompare(0., _nearFieldCoordinate->getStepX()))
            //{
            //    numX = (_nearFieldCoordinate->getEndX() - _nearFieldCoordinate->getStartX()) / _nearFieldCoordinate->getStepX();
            //}
            //if (!qFuzzyCompare(0., _nearFieldCoordinate->getStepY()))
            //{
            //    numY = (_nearFieldCoordinate->getEndY() - _nearFieldCoordinate->getStartY()) / _nearFieldCoordinate->getStepY();
            //}
            //if (!qFuzzyCompare(0., _nearFieldCoordinate->getStepZ()))
            //{
            //    numZ = (_nearFieldCoordinate->getEndZ() - _nearFieldCoordinate->getStartZ()) / _nearFieldCoordinate->getStepZ();
            //}

            //m_nearFieldDataGenerator->setTableExtends(numX, numY, numZ);
            //m_nearFieldDataGenerator->update();

            m_dataSet = m_nearFieldDataGenerator->getOutputData(); //structuredGrid
            if (m_dataSet == nullptr || m_dataSet->GetPointData() == nullptr || m_dataSet->GetPointData()->GetArray(0) == nullptr)
            {
                //BaseModule::MessageBoxButton bt;
                //emit IBaseSignalInstance->signal_showMessageDialog(QObject::tr("ERROR"),
                //    QObject::tr("Data Illegal!"), BaseModule::MessageBoxType::Error, bt);
                //m_isReadDataSuc = false;
                //return false;
            }
            m_scalarBarAutoDataRange[0] = m_dataSet->GetPointData()->GetArray(0)->GetRange()[0];
            m_scalarBarAutoDataRange[1] = m_dataSet->GetPointData()->GetArray(0)->GetRange()[1];
        }


        //表面流场
        //表面流场
        //表面流场
        else if (m_dataType == 2)
        {
            m_isReadDataSuc = ReadFieldData(filePath);
            if (!m_isReadDataSuc)
            {
                //BaseModule::MessageBoxButton bt;
                //emit IBaseSignalInstance->signal_showMessageDialog(QObject::tr("ERROR"),
                //    QObject::tr("Data Illegal!"), BaseModule::MessageBoxType::Error, bt);
                //m_isReadDataSuc = false;
                //return false;
            }
            m_dataSet = m_mutiReader->GetOutput();
        }

        m_originalRRange[0] = m_scalarBarAutoDataRange[0];
        m_originalRRange[1] = m_scalarBarAutoDataRange[1];

        setScalarBarRange();

        ui->lineEditSBTitleString->setText(m_scalarBarTitle.toStdString().c_str());
        m_scalarBarActor->SetTitle(m_scalarBarTitle.toStdString().c_str());
        m_scalarBarActor->SetUnconstrainedFontSize(true);
        generateResultActor();

        m_render3D->AddActor(m_dataActor);
        m_render3D->AddActor(m_scalarBarActor);
        m_render3D->ResetCamera();
        m_renderWindow3D->Render();
        return true;
    }

    void ThreeDimensionDiagraph::generateResultActor()
    {
        m_dataMapper->SetInputData(m_dataSet);
        m_dataMapper->SetLookupTable(m_lookupTable);
        m_dataMapper->SetInterpolateScalarsBeforeMapping(true);
        m_dataMapper->SetUseLookupTableScalarRange(1);
        m_dataMapper->ScalarVisibilityOn();
    }

    void ThreeDimensionDiagraph::InitDefaultLookupTable()
    {
        m_lookupTable->SetNumberOfColors(150);
        m_lookupTable->SetHueRange(0.67, 0.0);
        m_lookupTable->Build();
    }

    void ThreeDimensionDiagraph::initScalarBarPipeLine()
    {
        //m_scalarBarActor->SetTitle("Gain");
        m_scalarBarActor->SetBarRatio(0.25);
        m_scalarBarActor->GetTitleTextProperty()->SetJustificationToLeft();
        m_scalarBarActor->SetPosition(0.9, 0.1);
        m_scalarBarActor->SetPosition2(0.05, 0.7);
        m_scalarBarActor->SetNumberOfLabels(10);
        m_scalarBarActor->SetLookupTable(m_lookupTable);

        m_scalarBarWidget->SetScalarBarActor(m_scalarBarActor);
        vtkScalarBarRepresentation* rep =
            vtkScalarBarRepresentation::SafeDownCast(m_scalarBarWidget->GetRepresentation());
        rep->SetPosition(0.9, 0.1);
        rep->SetPosition2(0.05, 0.7);
        m_scalarBarWidget->SetInteractor(m_renderWindow3D->GetInteractor());
        m_scalarBarWidget->On();
    }

    void ThreeDimensionDiagraph::activeButtonAfterReadData()
    {
        setLogNormalButtonState(m_isReadDataSuc);
        ui->pb_exportData->setEnabled(m_isReadDataSuc);
        ui->tabWidget->setTabEnabled(1, m_isReadDataSuc);
        ui->tabWidget->setTabEnabled(2, m_isReadDataSuc);
    }

    void ThreeDimensionDiagraph::generateSlicePosition(int index)
    {
        ui->comboBox_slicePosition->clear();
        if (m_dataType != 1) //只有近场有切片位置选项
        {
            return;
        }
        //auto _currentCaseModel = ProjectManager::CaseModelManager::getinstance()->getCurrentCase();
        //auto _nearFieldCoordinate = _currentCaseModel->getMOMDataManager()->getMOMSimulationData()->getNearFieldCoordinateData();
        ////根据带求解项计算
        //if (index == 0) //x
        //{
        //    int num = (_nearFieldCoordinate->getEndX() - _nearFieldCoordinate->getStartX()) / _nearFieldCoordinate->getStepX() + 1;
        //    for (int i = 0; i < num; ++i)
        //    {
        //        ui->comboBox_slicePosition->addItem(
        //            QString::number(_nearFieldCoordinate->getStartX() + i * _nearFieldCoordinate->getStepX()));
        //    }
        //}
        //else if (index == 1)
        //{
        //    int num = (_nearFieldCoordinate->getEndY() - _nearFieldCoordinate->getStartY()) / _nearFieldCoordinate->getStepY() + 1;
        //    for (int i = 0; i < num; ++i)
        //    {
        //        ui->comboBox_slicePosition->addItem(
        //            QString::number(_nearFieldCoordinate->getStartY() + i * _nearFieldCoordinate->getStepY()));
        //    }
        //}
        //else if (index == 2)
        //{
        //    int num = (_nearFieldCoordinate->getEndZ() - _nearFieldCoordinate->getStartZ()) / _nearFieldCoordinate->getStepZ() + 1;
        //    for (int i = 0; i < num; ++i)
        //    {
        //        ui->comboBox_slicePosition->addItem(
        //            QString::number(_nearFieldCoordinate->getStartZ() + i * _nearFieldCoordinate->getStepZ()));
        //    }
        //}
    }

    //void ThreeDimensionDiagraph::writeMOMData()
    //{
    //    auto camera = m_render3D->GetActiveCamera();

    //    auto cameraViewUp = camera->GetViewUp();
    //    auto cameraPosition = camera->GetPosition();
    //    auto cameraFocalPoint = camera->GetFocalPoint();
    //    QList<double> cameraViewUpList{ cameraViewUp[0],cameraViewUp[1],cameraViewUp[2] };
    //    QList<double> cameraPositionList{ cameraPosition[0],cameraPosition[1],cameraPosition[2] };
    //    QList<double> cameraFocalPointList{ cameraFocalPoint[0],cameraFocalPoint[1],cameraFocalPoint[2] };
    //    QString cameraViewUpListStr = BaseModule::GlobalHelper::convertDoubleListToQString(cameraViewUpList);
    //    QString cameraPositionListStr = BaseModule::GlobalHelper::convertDoubleListToQString(cameraPositionList);
    //    QString cameraFocalPointListStr = BaseModule::GlobalHelper::convertDoubleListToQString(cameraFocalPointList);

    //    auto _titleColor = ui->comboBoxSBTitleColor->currentColor();
    //    QList<double> titleColor{ _titleColor.redF(), _titleColor.greenF(), _titleColor.blueF() };
    //    QString titleColorStr = BaseModule::GlobalHelper::convertDoubleListToQString(titleColor);

    //    QStringList _listPYCode;
    //    _listPYCode.append(QString("postthreedimensiongraphdata = PostWidgets.PostThreeDimensionGraphData()"));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setID(%1)").arg(m_iD));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setIsLogTheData(%1)").arg(m_shouldLogTheData));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setIsNormalizeTheData(%1)").arg(m_shouldNormalizeTheData));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setScalarBarProperty(\"%1\",\"%2\",%3,%4,%5,%6)")
    //        .arg(ui->lineEditSBTitleString->text())
    //        .arg(titleColorStr)
    //        .arg(ui->checkBoxScalarBarRangeAutomatic->isChecked())
    //        .arg(ui->doubleSpinBox_SBMinRange->value())
    //        .arg(ui->doubleSpinBox_SBMaxRange->value())
    //        .arg(ui->comboBoxSBFontSize->currentText().toInt()));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setGraphOpacity(%1)").arg(ui->slider_ResultTransparency->value()));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setMeshOpacity(%1)").arg(ui->slider_meshTransparency->value()));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setScaleFactor(%1)").arg(ui->doubleSpinBox_resultScale->value()));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setCameraParameters(\"%1\",\"%2\",\"%3\")")
    //        .arg(cameraViewUpListStr)
    //        .arg(cameraPositionListStr)
    //        .arg(cameraFocalPointListStr));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setCurrentFreqIndex(%1)").arg(ui->comboBoxFrequency->currentIndex()));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setIsEnableSlice(%1)").arg(ui->checkBox_enableSlice->isChecked()));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setSliceDirectionIndex(%1)").arg(ui->comboBox_sliceDirection->currentIndex()));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setSlicePositionIndex(%1)").arg(ui->comboBox_slicePosition->currentIndex()));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.setCurrentTagIndex(%1)").arg(ui->tabWidget->currentIndex()));
    //    _listPYCode.append(QString("postthreedimensiongraphdata.savePostThreeDimensionGraphData()"));

    //    emit IBaseSignalInstance->signal_execPYCode(_listPYCode);
    //}

    //void ThreeDimensionDiagraph::readDataFromDataManager()
    //{
    //    auto m_curCaseModel = ProjectManager::CaseModelManager::getinstance()->getCurrentCase();
    //    m_gain3DData = m_curCaseModel->getMOMDataManager()->getMOMSimulationData()->getThreeDimensionDataByID(m_iD).get();
    //    auto _currentFreqIndex = m_gain3DData->getFreqIndex();
    //    ui->comboBoxFrequency->setCurrentIndex(_currentFreqIndex);
    //    //先设频率再读数据
    //    on_pushBtnApply_clicked();
    //    if (!m_isReadDataSuc)
    //    {
    //        return;
    //    }

    //    m_shouldLogTheData = m_gain3DData->getIsLogTheData();
    //    auto meshOpacity = m_gain3DData->getMeshOpacity();
    //    auto graphOpacity = m_gain3DData->getGraphOpacity();
    //    m_shouldNormalizeTheData = m_gain3DData->getIsNormalized();

    //    auto _isEnableSlice = m_gain3DData->getEnableSlice();
    //    auto _sliceDirectionIndex = m_gain3DData->getSliceDirectionIndex();
    //    auto _slicePositionIndex = m_gain3DData->getSlicePosition();
    //    auto _currentTagIndex = m_gain3DData->getCurrentTagIndex();

    //    //scalarBar属性
    //    QString scaleBarTitle("");
    //    bool scaleBarAutoRange{ false };
    //    double scaleBarMaunalMin{ 0. };
    //    double scaleBarMaunalMax{ 0. };
    //    QList<double> _scaleBarTitleColor;
    //    int titleFontSize{ 8 };
    //    m_gain3DData->getScalarBarProperty(scaleBarTitle, scaleBarAutoRange,
    //        scaleBarMaunalMin, scaleBarMaunalMax, _scaleBarTitleColor, titleFontSize);


    //    //=======设置到界面==========

    //    ui->checkBox_normalization->setChecked(m_shouldNormalizeTheData);
    //    ui->checkBox_logarithm->setChecked(m_shouldLogTheData);

    //    ui->checkBoxScalarBarRangeAutomatic->setChecked(scaleBarAutoRange);
    //    ui->doubleSpinBox_SBMinRange->setValue(scaleBarMaunalMin);
    //    ui->doubleSpinBox_SBMaxRange->setValue(scaleBarMaunalMax);
    //    ui->comboBoxSBFontSize->setCurrentText(QString::number(titleFontSize));

    //    ui->slider_meshTransparency->setValue(meshOpacity);
    //    ui->slider_ResultTransparency->setValue(graphOpacity);

    //    ui->checkBox_enableSlice->setChecked(_isEnableSlice);
    //    ui->comboBox_sliceDirection->setCurrentIndex(_sliceDirectionIndex);
    //    ui->comboBox_slicePosition->setCurrentIndex(_slicePositionIndex);
    //    ui->tabWidget->setCurrentIndex(_currentTagIndex);
    //    ui->lineEditSBTitleString->setText(scaleBarTitle);
    //}

    //void ThreeDimensionDiagraph::restoreLogic()
    //{
    //    if (!m_isReadDataSuc)
    //    {
    //        return;
    //    }

    //    on_comboBoxSBFontSize_currentIndexChanged(ui->comboBoxSBFontSize->currentIndex());
    //    if (m_dataType == 0 || m_dataType == 1) //表面电流没有归一化和取对数
    //    {
    //        on_checkBox_normalization_stateChanged(ui->checkBox_normalization->isChecked());
    //        on_checkBox_logarithm_stateChanged(ui->checkBox_logarithm->isChecked());
    //    }
    //    on_checkBoxScalarBarRangeAutomatic_stateChanged(ui->checkBoxScalarBarRangeAutomatic->isChecked());
    //    on_slider_meshTransparency_valueChanged(ui->slider_meshTransparency->value());
    //    on_slider_ResultTransparency_valueChanged(ui->slider_ResultTransparency->value());
    //    //on_comboBoxFrequency_currentIndexChanged(ui->comboBoxFrequency->currentIndex());
    //    on_checkBox_enableSlice_stateChanged(ui->checkBox_enableSlice->isChecked());
    //    on_comboBox_sliceDirection_currentIndexChanged(m_gain3DData->getSliceDirectionIndex());
    //    ui->comboBox_slicePosition->setCurrentIndex(m_gain3DData->getSlicePosition());

    //    auto scaleFactor = m_gain3DData->getScaleFactor();
    //    ui->doubleSpinBox_resultScale->setValue(scaleFactor);
    //    //on_doubleSpinBox_resultScale_valueChanged(scaleFactor);

    //    //相机参数
    //    QList<double> viewUp{};
    //    QList<double> position{};
    //    QList<double> focalPoint{};
    //    m_gain3DData->getCameraParameters(viewUp, position, focalPoint);

    //    auto camera = m_render3D->GetActiveCamera();
    //    camera->SetViewUp(viewUp[0], viewUp[1], viewUp[2]);
    //    camera->SetPosition(position[0], position[1], position[2]);
    //    camera->SetFocalPoint(focalPoint[0], focalPoint[1], focalPoint[2]);
    //    camera->Modified();
    //    m_render3D->ResetCameraClippingRange();
    //}

    //void ThreeDimensionDiagraph::importPreProcessWindowData()
    //{
    //    auto render = IWidgetSignalInstance->signal_getRenderer();
    //    if (render == nullptr)
    //    {
    //        return;
    //    }
    //    m_render3D->SetBackground(render->GetBackground());
    //    m_render3D->SetBackground2(render->GetBackground2());
    //    m_render3D->SetGradientBackground(render->GetGradientBackground());

    //    m_preWDmeshActorsList.clear();
    //    QList<QList<QList<vtkProp*>>> _preWDmeshActors;
    //    IWidgetSignalInstance->signal_getAllMeshActors(_preWDmeshActors);

    //    for (auto meshKernalActor : _preWDmeshActors)//每一个mesh
    //    {
    //        if (meshKernalActor.size() != 4) //4个actor 面、线、点、法线
    //        {
    //            return;
    //        }
    //        for (int i = 0; i < 2; ++i)//只取面。线
    //        {
    //            auto actorList = meshKernalActor[i];//面或者线
    //            for (auto _actor : actorList)
    //            {
    //                vtkActor* sourceActor = vtkActor::SafeDownCast(_actor);
    //                if (sourceActor == nullptr)
    //                {
    //                    return;
    //                }
    //                vtkNew<vtkActor> copiedActor;
    //                copyActor(sourceActor, copiedActor);
    //                copiedActor->GetProperty()->SetOpacity(1);
    //                copiedActor->SetVisibility(true);
    //                m_preWDmeshActorsList.append(copiedActor);
    //                m_render3D->AddActor(copiedActor);
    //            }
    //        }
    //    }

    //    m_render3D->ResetCamera();
    //    m_renderWindow3D->Render();
    //}

    void ThreeDimensionDiagraph::on_comboBoxFrequency_currentIndexChanged(int index)
    {

    }

    void ThreeDimensionDiagraph::on_pushBtnApply_clicked()
    {
        //if (m_dataType != 0 && m_dataType != 1 && m_dataType != 2)
        //{
        //    return;
        //}
        //m_filePathToRead = generateFilePath(m_fileName, ui->comboBoxFrequency->currentIndex());
        ////判别读哪个文件
        //auto suc = readData(m_filePathToRead);
        //if (!suc)
        //{
        //    BaseModule::MessageBoxButton bt;
        //    emit IBaseSignalInstance->signal_showMessageDialog(QObject::tr("ERROR"),
        //        QObject::tr("Data read error!"), BaseModule::MessageBoxType::Error, bt);
        //    return;
        //}
        activeButtonAfterReadData();
    }

    void ThreeDimensionDiagraph::on_checkBox_normalization_stateChanged(int state)
    {
        m_shouldNormalizeTheData = state;
        if (m_dataType == 0)
        {
            m_farFieldDataGenerator->setNormalizeTheData(state);
            m_farFieldDataGenerator->update();
        }
        else if (m_dataType == 1)
        {
            m_nearFieldDataGenerator->setNormalizeTheData(state);
            m_nearFieldDataGenerator->update();
        }

        m_scalarBarAutoDataRange[0] = m_dataSet->GetPointData()->GetArray(0)->GetRange()[0];
        m_scalarBarAutoDataRange[1] = m_dataSet->GetPointData()->GetArray(0)->GetRange()[1];

        setScalarBarRange();
        m_dataActor->Modified();
        m_render3D->ResetCamera();
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_checkBox_logarithm_stateChanged(int state)
    {
        m_shouldLogTheData = state;

        if (m_dataType == 0)
        {
            m_farFieldDataGenerator->setLogTheData(state);
            m_farFieldDataGenerator->update();
        }
        else if (m_dataType == 1)
        {
            m_nearFieldDataGenerator->setLogTheData(state);
            m_nearFieldDataGenerator->update();
        }

        m_scalarBarAutoDataRange[0] = m_dataSet->GetPointData()->GetArray(0)->GetRange()[0];
        m_scalarBarAutoDataRange[1] = m_dataSet->GetPointData()->GetArray(0)->GetRange()[1];

        m_logDataRRange[0] = m_scalarBarAutoDataRange[0];
        m_logDataRRange[1] = m_scalarBarAutoDataRange[1];
        //防止处0和其他异常
        if ((m_logDataRRange[1] != m_logDataRRange[0]) && (m_originalRRange[1] != m_originalRRange[0]))
        {
            m_logDefautFactory = (m_originalRRange[1] - m_originalRRange[0]) / (m_logDataRRange[1] - m_logDataRRange[0]);
        }
        on_doubleSpinBox_resultScale_valueChanged(ui->doubleSpinBox_resultScale->value());
        setScalarBarRange();
        m_dataActor->Modified();
        m_render3D->ResetCamera();
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_pushButton_fitView_clicked()
    {
        m_render3D->ResetCamera();
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_btnTopView_clicked()
    {
        resetCameraViewDirection(m_render3D->GetActiveCamera(), 0, 0, -1, 0, 1, 0);
    }

    void ThreeDimensionDiagraph::on_btnBottomView_clicked()
    {
        resetCameraViewDirection(m_render3D->GetActiveCamera(), 0, 0, 1, 0, 1, 0);
    }

    void ThreeDimensionDiagraph::on_btnFrontView_clicked()
    {
        resetCameraViewDirection(m_render3D->GetActiveCamera(), -1, 0, 0, 0, 0, 1);
    }

    void ThreeDimensionDiagraph::on_btnBackView_clicked()
    {
        resetCameraViewDirection(m_render3D->GetActiveCamera(), 1, 0, 0, 0, 0, 1);
    }

    void ThreeDimensionDiagraph::on_btnLeftView_clicked()
    {
        resetCameraViewDirection(m_render3D->GetActiveCamera(), 0, 1, 0, 0, 0, 1);
    }

    void ThreeDimensionDiagraph::on_btnRightView_clicked()
    {
        resetCameraViewDirection(m_render3D->GetActiveCamera(), 0, -1, 0, 0, 0, 1);
    }

    void ThreeDimensionDiagraph::on_lineEditSBTitleString_editingFinished()
    {
        m_scalarBarActor->SetTitle(ui->lineEditSBTitleString->text().toStdString().c_str());
        m_scalarBarActor->Modified();
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_comboBoxSBTitleColor_activated(int index)
    {
        auto color = ui->comboBoxSBTitleColor->currentColor();
        m_scalarBarActor->GetTitleTextProperty()->SetColor(color.redF(), color.greenF(), color.blueF());
        m_scalarBarActor->Modified();
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_comboBoxSBFontSize_currentIndexChanged(int index)
    {
        auto size = ui->comboBoxSBFontSize->currentText().toInt();
        m_scalarBarActor->GetTitleTextProperty()->SetFontSize(size);
        m_scalarBarActor->Modified();
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_checkBoxScalarBarRangeAutomatic_stateChanged(int state)
    {

        ui->doubleSpinBox_SBMinRange->setEnabled(!state);
        ui->doubleSpinBox_SBMaxRange->setEnabled(!state);

        setScalarBarRange();
        m_scalarBarActor->Modified();
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_doubleSpinBox_SBMinRange_valueChanged(double value)
    {
        m_lookupTable->SetRange(ui->doubleSpinBox_SBMinRange->value(), ui->doubleSpinBox_SBMaxRange->value());
        m_widgetCutter->SetScalarBarRange(ui->doubleSpinBox_SBMinRange->value(), ui->doubleSpinBox_SBMaxRange->value());
        m_scalarBarActor->Modified();
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_doubleSpinBox_SBMaxRange_valueChanged(double value)
    {
        m_lookupTable->SetRange(ui->doubleSpinBox_SBMinRange->value(), ui->doubleSpinBox_SBMaxRange->value());
        m_widgetCutter->SetScalarBarRange(ui->doubleSpinBox_SBMinRange->value(), ui->doubleSpinBox_SBMaxRange->value());
        m_scalarBarActor->Modified();
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_slider_meshTransparency_valueChanged(int value)
    {
        for (auto i : m_preWDmeshActorsList)
        {
            auto opa = 1 - value / 100.0;
            i->GetProperty()->SetOpacity(opa);
            auto backFaceProp = i->GetBackfaceProperty();
            if (backFaceProp)
            {
                backFaceProp->SetOpacity(opa);
            }
            value == 100 ? i->SetVisibility(false) : i->SetVisibility(true);
        }
        QString str = QString::number(value) + "%";
        ui->label_meshTransValue->setText(str);
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_slider_ResultTransparency_valueChanged(int value)
    {
        auto opa = 1 - value / 100.0;
        m_dataActor->GetProperty()->SetOpacity(opa);
        m_scalarBarActor->Modified();
        QString str = QString::number(value) + "%";
        ui->label_resultTransValue->setText(str);
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_checkBox_enableSlice_stateChanged(int state)
    {
        //调整界面上的控件
        ui->comboBox_sliceDirection->setEnabled(state);
        if (m_dataType == 1) //近场
        {
            ui->comboBox_slicePosition->setEnabled(state);
            on_comboBox_slicePosition_currentIndexChanged(ui->comboBox_slicePosition->currentIndex());
        }

        AddCutter();
        if (!m_isCutterAdded)
        {
            return;
        }

        m_widgetCutter->GetCutterActor()->SetVisibility(state);
        state ? m_widgetCutter->TurnWidgetOn() : m_widgetCutter->TurnAllWidgetOff();
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::AddCutter()
    {
        if (m_isCutterAdded)
        {
            return;
        }
        m_widgetCutter->SetInteractor(m_renderWindow3D->GetInteractor());
        m_widgetCutter->SetInputData(m_dataSet);
        m_widgetCutter->SetCenter(m_dataSet->GetCenter());
        m_widgetCutter->GetPlaneWidget()->GetHandleProperty()->SetOpacity(0.4);
        m_widgetCutter->SetPlaneNormalDirection(pst::WidgetCutter::PlaneNormalDirection::X);

        setScalarBarRange();
        m_widgetCutter->GetDataOutlineActor()->VisibilityOff();
        m_widgetCutter->TurnAllWidgetOff();
        m_widgetCutter->Update();
        //m_widgetCutter->TurnAllWidgetOff();
        m_widgetCutter->TurnWidgetOn();
        m_render3D->AddActor(m_widgetCutter->GetCutterActor());
        m_widgetCutter->GetScalarBar()->SetVisibility(false);

        generateSlicePosition(ui->comboBox_sliceDirection->currentIndex());

        m_isCutterAdded = true;
    }

    void ThreeDimensionDiagraph::on_comboBox_sliceDirection_currentIndexChanged(int index)
    {
        if (!ui->checkBox_enableSlice->isChecked())
        {
            return;
        }
        if (index == 0)
        {
            m_widgetCutter->SetPlaneNormalDirection(pst::WidgetCutter::PlaneNormalDirection::X);
        }
        else if (index == 1)
        {
            m_widgetCutter->SetPlaneNormalDirection(pst::WidgetCutter::PlaneNormalDirection::Y);
        }
        else if (index == 2)
        {
            m_widgetCutter->SetPlaneNormalDirection(pst::WidgetCutter::PlaneNormalDirection::Z);
        }
        generateSlicePosition(index);
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::on_comboBox_slicePosition_currentIndexChanged(int index)
    {
        if (!ui->checkBox_enableSlice->isChecked())
        {
            return;
        }
        auto bounds = m_dataSet->GetBounds();//边界范围


        auto dataCenter = m_dataSet->GetCenter();
        double center[3]{ dataCenter[0],dataCenter[1],dataCenter[2] };
        if (ui->comboBox_sliceDirection->currentIndex() == 0)//x
        {
            center[0] = ui->comboBox_slicePosition->currentText().toDouble();


            // 可能由于精度损失，切不到数据，
            // 将两端的切片位置中心移动一定范围
            int num = ui->comboBox_slicePosition->count();//不同方向数量可能不同
            if (index == 0)//最小
            {
                center[0] += std::min((bounds[1] - bounds[0]) / 1000000., 0.0000001);
            }
            else if (index = num - 1) //最大
            {
                center[0] -= std::min((bounds[1] - bounds[0]) / 1000000., 0.0000001);
            }
        }
        else if (ui->comboBox_sliceDirection->currentIndex() == 1)//y
        {
            center[1] = ui->comboBox_slicePosition->currentText().toDouble();

            int num = ui->comboBox_slicePosition->count();//不同方向数量可能不同
            if (index == 0)//最小
            {
                center[1] += std::min((bounds[3] - bounds[2]) / 1000000., 0.0000001);
            }
            else if (index = num - 1) //最大
            {
                center[1] -= std::min((bounds[3] - bounds[2]) / 1000000., 0.0000001);
            }
        }
        else if (ui->comboBox_sliceDirection->currentIndex() == 2)//z
        {
            center[2] = ui->comboBox_slicePosition->currentText().toDouble();

            int num = ui->comboBox_slicePosition->count();//不同方向数量可能不同
            if (index == 0)//最小
            {
                center[2] += std::min((bounds[5] - bounds[4]) / 1000000., 0.0000001);
            }
            else if (index = num - 1) //最大
            {
                center[2] -= std::min((bounds[5] - bounds[4]) / 1000000., 0.0000001);
            }
        }
        m_widgetCutter->SetCenter(center);
        m_widgetCutter->refreshWidget();
        //m_widgetCutter->TurnAllWidgetOff();
        //m_widgetCutter->Update();
        m_renderWindow3D->Render();

    }

    void ThreeDimensionDiagraph::on_pb_exportData_clicked()
    {
        QString desFilePath("");

        if (m_dataType == 0 || m_dataType == 1)
        {
            desFilePath = QFileDialog::getSaveFileName(this, tr("Export Data"), "", tr("TXT(*.txt)"));

        }
        else if (m_dataType == 2)
        {
            desFilePath = QFileDialog::getSaveFileName(this, tr("Export Data"), "", tr("VTK(*.vtk)"));
        }
        if (!m_filePathToRead.isEmpty() && !desFilePath.isEmpty())
        {
            QFile file(desFilePath);
            if (file.exists())
            {
                file.remove();
            }
            QFile::copy(m_filePathToRead, desFilePath);
        }
    }

    void ThreeDimensionDiagraph::on_doubleSpinBox_resultScale_valueChanged(double value)
    {
        auto scale = ui->checkBox_logarithm->isChecked() ?
            m_logDefautFactory * value / 100. : value / 100.;

        m_dataActor->SetScale(scale);
        if (m_widgetCutter->GetCutterActor())
        {
            m_widgetCutter->GetCutterActor()->SetScale(scale);
        }
        m_renderWindow3D->Render();
    }

    void ThreeDimensionDiagraph::slot_refreshWindowTitle(int caseID, int resultType, int viewResultDataID)
    {
        //if (m_caseID <= 0 || m_caseID != caseID || m_viewResultDataID != viewResultDataID
        //    || resultType != (int)BaseModule::ResultType::ResultThreeDimensionGraph)
        //{
        //    return;
        //}

        //auto caseModel = ProjectManager::CaseModelManager::getinstance()->getModelByID(caseID);
        //if (caseModel)
        //{
        //    if (caseModel->getTreeType() == BaseModule::SolverType::MOM)
        //    {
        //        auto viewResultData = caseModel->getMOMDataManager()->getMOMSimulationData()->getViewResultByID(viewResultDataID);
        //        QString title = viewResultData->getName();
        //        setWindowTitle(title);
        //        setBaseWindowTitle(title);
        //    }
        //    else if (caseModel->getTreeType() == BaseModule::SolverType::FEM)
        //    {
        //        auto viewResultData = caseModel->getFEMDataManager()->getFEMSimulationData()->getViewResultByID(viewResultDataID);
        //        QString title = viewResultData->getName();
        //        setWindowTitle(title);
        //        setBaseWindowTitle(title);
        //    }
        //}
    }

    bool ThreeDimensionDiagraph::readerDelimitedTextFromLocal(const QString& fileName)
    {
        if (!vtksys::SystemTools::FileExists(fileName.toStdString(), true))
        {
            return false;
        }
        m_delimitedTextReader->SetFileName(fileName.toStdString().c_str());
        m_delimitedTextReader->SetHaveHeaders(true);
        m_delimitedTextReader->SetDetectNumericColumns(true);
        m_delimitedTextReader->SetFieldDelimiterCharacters(",");
        m_delimitedTextReader->SetUseStringDelimiter(true);
        m_delimitedTextReader->Update();

        if (m_delimitedTextReader->GetOutput() == nullptr)
        {
            return false;
        }
        return true;
    }

    void ThreeDimensionDiagraph::resetCameraViewDirection(
        vtkCamera* camera, double look_x, double look_y,
        double look_z, double up_x, double up_y, double up_z)
    {
        double pos[3] = { 0, 0, 0 };
        double focal_point[3] = { look_x, look_y, look_z };
        double view_up[3] = { up_x, up_y, up_z };
        camera->SetPosition(pos);
        camera->SetFocalPoint(focal_point);
        camera->SetViewUp(view_up);

        m_render3D->ResetCamera();
        this->ui->qvtkWidget->renderWindow()->Render();
    }

    void ThreeDimensionDiagraph::copyActor(vtkActor* sourceActor, vtkSmartPointer<vtkActor> desActor)
    {
        //sourceActor->GetProperty()->SetRepresentationToWireframe();
        auto sourceData = sourceActor->GetMapper()->GetInput();
        auto sourceMapper = sourceActor->GetMapper();
        auto sourceProperty = sourceActor->GetProperty();
        auto sourceBackFaceProperty = sourceActor->GetBackfaceProperty();

        vtkNew<vtkDataSetMapper> mapper;
        mapper->ShallowCopy(sourceMapper);
        mapper->SetInputData(sourceData);
        desActor->SetMapper(mapper);

        vtkNew<vtkProperty> property;
        property->DeepCopy(sourceProperty);
        desActor->SetProperty(property);

        if (sourceBackFaceProperty)
        {
            vtkNew<vtkProperty> backFaceProperty;
            backFaceProperty->DeepCopy(sourceBackFaceProperty);
            desActor->SetBackfaceProperty(backFaceProperty);
        }
    }

    void ThreeDimensionDiagraph::setScalarBarRange()
    {
        if (ui->checkBoxScalarBarRangeAutomatic->isChecked())
        {
            m_lookupTable->SetRange(m_scalarBarAutoDataRange);
            m_widgetCutter->SetScalarBarRange(m_scalarBarAutoDataRange[0], m_scalarBarAutoDataRange[1]);
        }
        else
        {
            m_lookupTable->SetRange(ui->doubleSpinBox_SBMinRange->value(), ui->doubleSpinBox_SBMaxRange->value());
            m_widgetCutter->SetScalarBarRange(ui->doubleSpinBox_SBMinRange->value(), ui->doubleSpinBox_SBMaxRange->value());
        }
    }
}